Dog Trace d-fence

The electronic invisible DOGtrace™ d-fence, consisting of the transmitter, the antenna wire (150 metres supplied), and the collar will help you to limit the range of movement of your dog, create the 'prohibited zones', without restrictung its freedom of movement. It activates itself when the dog approaches the zone. This system is suitable for any type of area as it is very easy to install by using DIY tools. Thanks to the ergonomic design and low product weight of the collar it is possible to use it even for small dog breeds. Collar is compact and waterproof. There is no limit for the number of dogs wearing electronic collars within the range of one transmitter.

For the system to operate, the wire must be connected to the transmitter and it must form an uninterrupted wire loop. Unreel the wire from the transmitter round your piece of land. The wire can be laid on the ground, slightly buried (max. 10 cm deep), or it can be fixed to the existing fence or wall (in this case max. up to 30 cm above the ground). In the standard pack there is an antenna wire long 100 meters. If you need more then 100 meters of the antenna wire, you can purchase additional wire.

Advantages of the invisible d-fence

• Very easy and fast installation
• Cheap and very flexible way of fencing your land – if needed, within a moment you can change the whole fencing to suit your current needs (fencing round the swimming pool, flower beds, rockery, entrance door to your house...)
• Fence is 'invisible', it does not interrupt the view to your neighbourhood or does not destroy the garden aesthetically
• You can only improve your existing fence that your dog often fights with (jumps over, goes under, chews away...)
• In the area you have set up you can keep any number of dogs you like
  „Your dog will only learn where he can and where he is prohibited to go and he can move freely round your whole garden.“

Function

• On stand-by mode fence waits until your dog approaches the forbidden zone (created by an isolated wire like an aerial) which is divided into two zones
• If your dog enters the first (warning) zone, the collar releases a bleep sound
• If your dog then enters the second (correction) zone, the collar releases an electrical impulse to addition of the bleep sound
• When the dog leaves the zones the system goes back into stand-by
• Width of both zones can be adjusted within certain limits
• Dogs learn very quickly to get round within defined territory
• Training markers around allocated territory can increase its effectiveness
• The number of dogs wearing collar on the system is not limited

Features

Transmitter

• First zone (warning): adjustable between 0.4 - 5 metres
• Second zone (correcting):adjustable between 0.3 - 1.5 meters
• Wire (150 metres supplied)
• Power supply: adapter 203 V/ 50 Hz, 15 V/ 100 mA
• Boundary area: 22 acres
• Dimensions (length x wideness x height): 150 x 120 x 40 mm

Collar

• Measures: 34 x 40 x 62 mm
• Weight: 65 grams (box, battery)
• Power supply: CR2 3V lithium battery
• Battery lifetime: 6 months on a stand-by position
• Adjustable lengths of collar: 20 – 70 centimetres
• Waterproof, reliable in all conditions
• Intensity of electrical impulse can be adjusted on collar

Supply includes

Transmitter
100m 1mm2 wire
Power adapter
2 connectors for connecting wires
Collar
Electrodes 17 mm
Electrodes 12 mm
CR2 3V lithium battery
Neon test discharge lamp

Optional accessories
Collar for another dog
Plastic targets for marking zones
100m of insulated wire with 1mm2, 1.5mm2, 2.5mm2 depending on the size area
Multicoloured woven belts
Spare battery

All required fields are marked with a star (*). Click the 'Add To Cart' button at the bottom of this form to proceed.